NFT 102÷603 NFC 602÷703
Power outputs from 0.91 to 8.41 kW. Vertical or horizontal installation. Left-hand water connections (right-hand version available on request).
-
Different Systems.
- System Design
- Resources
- Products
- Services
Fan Coil Units
At Green & Co Renewables Ltd we provide a complete range of DeLonghi-Climaventa Fan Coils and internal Air Handling Units to complement the Heat Pump range.
This high quality range of Fan Coils and Air Handling Units allows a complete climate control system to be specified which can provide heating, air-conditioning and domestic hot water.
The benefits of these water based cooling and heating systems can be significant, for example the amount of refrigerant within the system is reduced and the potential risk of refrigerant leaks is minimised when compared to refrigerant based direct expansion systems.
Also system installation is simplified as no high pressure refrigerant pipework is required within the building as the refrigeration system is positioned externally within the fully packaged Air Source Heat Pump or within the Ground Source Heat Pump positioned within the plant area.
Each Installer has been trained to design the control format of each Fan Coil or Internal Air Handling system carefully and to meet the demands of each application. You can be assured that as a trained Installer we are able to deliver a high level of service with high quality equipment and a very practical approach to every project.
Contact us today to organise your FREE site Survey.
DeLonghi-Climaveneta are committed to designing efficient fan coil systems with reliability and ease of use.
Following are the complete range of Fan coils, available for any residential application.
FAN COILS, FLOOR CEILING, CASSETTE, DUCTED AND WALL MOUNTED HYDRONIC UNITS. RANGE 1 - 39 kW.
Six different outputs with low noise tangential fan for domestic use.
Four different outputs with low revolution centrifugal fan for use in the tertiary sector or in small ductable installations.
Plug-In controls CP and CE (with quick connectors) are available. Infrared remote control unit for CE version and electronic wall thermostat PCE are available. Air filter on all models.
Cabinet in hot galvanised epoxy powder coated steel for maximum resistance to rust.
Large outlet grill and low noise fan assembly.
NFCC 202÷1003
Output from 1.3 to 23.4 kW. Standard water fittings, reversible on site.
Available in 15 different output versions with low revolution centrifugal fans, suitable for use in the tertiary sector and for small ducted installations.
Structure made entirely from metal panel, witch plastic discharge and intake grilles. Plug-In controls CP and CE (with quick connectors) are available.
Infrared remote control unit for CE version and electronic wall thermostat PCE are available. Air filter on all models.
Cabinet in hot galvanised epoxy powder coated steel for maximum resistance to rust. Plastic air discharge and intake grilles. High performance, low noise centrifugal fan assembly. Controls and heat exchanger reversible on site.
Access to controls protected by lockable hatch. Fan coil suitable for vertical/horizontal installation.
NFCC I 303÷1003 HP
Output from 2.2 to 9.7 kW. Standard water fittings, reversible on site.
Available in 5 different output versions with low revolution centrifugal fans with high head fan unit hight pressure, suitable for use in the tertiary sector and for ducted installations.
Structure made entirely from metal panel.
Infrared remote control unit and electronic wall thermostat PCE are available.
Air filter on all models.
NHDU 402÷1103 2T
NHDU two pipes are terminals of a hydronic system and are designed for flush mounting in false ceilings.
They can be used with a water chiller to form an air conditioning system, with a reversible heat pump for an air conditioning and heating system or in combination with a heat generator to form a heating terminal.
The outputs available range from 2.00 kW to 12.5 kW in the standard configuration.
The versions and outputs available the vast range of accessories enable flexible air treatment installations to be constructed to meet all requirements.
XHDU 502÷1203
XHDU are terminals of a hydronic system and are designed for flush mounting in false ceilings.
They can be used with a water chiller to form an air conditioning system, with a reversible heat pump for an air conditioning and heating system or in combination with a heat generator to form a heating terminal.
The outputs available range from 2.68 kW to 14.00 kW in the standard configuration in cooling.
The versions and outputs available the vast range of accessories enable flexible air treatment installations to be constructed to meet all requirements.
HWD 602÷1104
HWD are terminals of a hydronic unit. They can be used with a water chiller to form an air conditioning system, with a reversible heat pump for an air conditioning and heating system or in combination with a heat generator to form a heating terminal.
The outputs available range from 5.2 kW to 15.8 kW in the standard configuration in cooling.
The outputs available, the possibility of horizontal installation and the vast range of accessories enable flexible air treatment installations to be constructed to meet all requirements.
The possibility of regulating air flow ensures maximum comfort in all situations.
HWD 0071÷0121
HWD are two section terminals of a hydronic system. When used in combination with water chillers, they form an air conditioning system. When used with reversible water chillers/heat pumps, they form an air conditioning and heating system.
When used with a heat generator, they form a terminal unit for heating. Available with cooling outputs from 16.8 kW to 29.8 kW in the standard configuration.
The range of outputs available, the possibility of horizontal or vertical installation, and the large range of accessories available make it possible to create flexible air treatment installations to meet all requirements.
Thanks to the attractive coated external panelling, the units are suitable for in-view installation. The air flow can be regulated to ensure maximum comfort in all situations.
MIC 30÷60
Climaveneta wall-mounted fan coil units available with outputs from 2.00 to 5.00 kW are the Climaveneta Group’s response to an increasingly mature market, ever more demanding as regards both products and services.
Climaveneta has developed a product with high technological content.
One of the best known companies in the air conditioning sector, Climaveneta’s network of professional installers, provided with constant back-up from the company, guarantees a rapid assistance and consultancy service with excellent coverage.
